How To Remove A Broken Window Handle

Hullo,
My kitchen window handle will not open and is currently in the locked position. The key can also not be turned to open the window equally it seems to be seized up. Can anyone suggest of the best way to remove this window handle and replace it with a new one. I accept also tried to fit a scraper between the handle and window to unlock the handler, but still no luck. I take attached a photo of the handle below. Thanks.
Attached Files:
Remove that oval cap & there will exist a spiral underneath which can exist removed,assuasive handle to be removed from spindle.
https://www.handlestore.com/w08-rep...VybHtCh1L2gDwEAQYAiABEgKrWfD_BwE#83=113&139=8
It looks like a fab north ready handle.
I call back the spindle gets cutting to match the original length. Also demand the correct handed on i.e LH or RH,.
Thanks for your response. Is there not a farther screw located nether the handler to the correct? The window handles I accept replaced in our sleeping room needed the window handle to be lifted to go to a further spiral. In one case this further screw had been removed, information technology released the window handle. Cheers.
QUOTE="KIAB, post: 1695764, member: 124622"]Remove that oval cap & there will exist a spiral underneath which can exist removed,allowing handle to be removed from spindle.

https://www.handlestore.com/w08-rep...VybHtCh1L2gDwEAQYAiABEgKrWfD_BwE#83=113&139=8[/QUOTE]
Yes that is correct. The handles which I have rpevilusly ordered are universal, so tin can piece of work with both LH and RH. My upshot is that I can not open the window or go to the further screw as the handle volition non budge at all.
QUOTE="Jitender, mail service: 1695770, member: 76982"]It looks like a fab n set up handle.

I think the spindle gets cut to match the original length. Also need the correct handed on i.e LH or RH,.[/QUOTE]
Try some WD40 in fundamental hole, might loosen things up.
And I've cut off a handle going through lock with a sparse cutting disc on iv.five" grinder in the by,just fashion I could remove it.

Put a piece of ply under handle to protect frame & cover glass completey, every bit sparks will mark & pit the drinking glass.
That's a mess.. Saw off or drill lock out and go go new from screwfix. And yes two screws as you seem aware. I've also replaced the locking casement on a few that bust as easy job and bought off ebay if things go actually wrong..don't panic
Hello
I've got the aforementioned trouble. Recently moved into a new firm and constitute that one of my windows doesn't lock. Handle wont budge at all. I've located the screw only it seems all the thread has gone. Just wondering best selection to remove screw so I can replace the handle.

Many thanks
2 screws...1 nether cap and i under the locking point then you need to open handle. Bust and supplant cssement..simple diy job
I cant open up the handle seems like the locking mechanism has jammed. Also cant disengage peak screw as there is no thread to latch onto
This is the height screw I cant leave
Fastened Files:
I replaced upvc bathroom mechanism. Cardboard and sheets everywhere. Cutting handle off with thin metal grinder bract. Got access to handle screws. Mole grip or cut off screw. Open window. Remove screws outside edge. I had to employ universal replacement as online seller advised best bet. Fitted with new handle. Easy chore when you see it...
https://www.handlesandhinges.co.uk/...EQplI7JJgNN5ON_v8uH621eyvo1bLdnBoCelwQAvD_BwE
That screw is a mess..buy a rounded screw remover..screwfix sell. They are designed to remove screws that are like yours..there is another screw you need to access when you open handle